Lock Schlage Keypad: How To
Lock Schlage Keypad – Schlage Smart Lock BE365 and BE369 Keypad Deadbolts offer the Schlage Turn Lock function, popularly known as Lock and Leave.
The feature, when activated, allows you to lock the deadbolt from the outside without having to enter a User Code. In other words, you can simply press the Schlage button and then rotate the thumb turn to unlock the deadbolt.
When this feature malfunctions, you must enter a valid User Code before you may turn the thumb turn to lock the deadbolt, which might be a hassle. Keep reading if this sounds like your situation since this post includes essential information that will help you fix the smart door lock.
First things first, let’s get started.
Troubleshooting Tips for Schlage Turn Lock Feature Problems
1. Check to see if the Turn Lock Feature is activated before proceeding
Despite the fact that the Turn Lock feature is activated by default, you may have unintentionally turned it off. Hence, you’ll want to make sure the feature is activated before attempting to lock the deadbolt without entering a User Code.
Turn Lock can be activated by following these instructions:
- Wait for the Schlage button to glow three orange lights and beep three times after you enter your current Programming Code.
- When you’re done pressing Schlage, press 7 to exit.
- When the operation is complete, the Schlage button will flash a single green light and emit a lengthy beep.
The Turn Lock feature can be enabled or disabled using the same technique as above.
Afterward, if the deadbolt still doesn’t work, try unlocking it without inputting a User Code. Whether it doesn’t, go through the process again and see if it works.
Also, make that the deadbolt is properly secured. Schlage’s button should be pressed before twisting the thumb turn. As a visual aid, please look at the image below for reference.
2. In order to factory reset your lock, follow these instructions:
If the first step failed to resolve the issue, this is your next best option.
Schlage’s Turn Lock feature is activated by default, as previously stated. When you factory reset the lock, all factory settings will be restored to their preset values.
The Turn Lock feature will also work again if you restore factory settings.
Following these instructions, you can reset your Schlage keypad lock (BE365):
- Unscrew the battery cover and remove the battery from the device.
- The Schlage button can be activated and deactivated by pressing and releasing it.
- Press and hold the Schlage button for a few seconds until it lights up green, and then release to unlock the door.
Enter one of the Default User Codes to see if it unlocks the lock to verify that the reset was successful. You can repeat the instructions and make sure you finish in under 10 seconds if it doesn’t work the first time.
All prior settings will be erased if you factory reset your lock. Changing the Programming Code, adding User Codes, etc., will all require a fresh start when programming your lock. Go here for programming instructions for the Schlage BE356.
To see if the Turn Lock issue has been resolved, try locking the deadbolt from the outside without inputting a User Code first.
After resetting the lock, contact Schlage Technical Support if the Turn Lock feature still doesn’t work. Schlage can be contacted here.
Finishing the Job
If you want to rapidly lock your door from the outside without inputting a User Code, you may choose to enable the Schlage Turn Lock option; unauthorized people can lock your door from outside. Make sure you understand the consequences before deciding whether or not to activate or deactivate the option.
When the Schlage Turn Lock function does not work in your lock, you can solve it by making sure the feature is activated or by factory resetting the lock. See above for instructions on how to activate the Turn Lock feature and reset your lock.
Thank you for reading Lock Schlage Keypad, please see our recommendation below: