Locks For Coolers – Coolers have evolved over time to become more and more capable. Gone are the days when everyone carried around a ten-dollar Igloo cooler that was missing paint and emitted some strange odors. High-end coolers with vastly better ice retention capabilities, build quality, functionality, and storage capacity are more prevalent.
While we all applaud the advancements in cooler technology throughout time, there is an unintended consequence. The most expensive ice chests can be rather costly! Unfortunately, we live in a world where precious objects cannot be left out in the open for fear of being stolen. For those who aren’t feeling bold, they can just remove goods from the cooler.
Because a cooler’s most typical habitat is being outside and often unattended, several businesses have developed to meet this requirement. And that solution is in the form of what are known as cooler locks.
Locks For Coolers are divided into two categories:
- A device that lets you secure your cooler to a huge item, such as the back of your tailgate, a structure near your home, or another hard-to-move structure. This would prevent the cooler from being stolen, but it would still allow access to the contents it holds. It also helps to keep your cooler from sliding about or falling out.
- A device that prevents access to the cooler’s contents. This would allow someone to steal the entire cooler, but it would make accessing the contents much more difficult.
There are a variety of techniques to open the lock. There are key locks, combination locks, and locks that must be removed with a tool.
We’ll go over our top cooler lock picks in this article. We’ll also go through the benefits and drawbacks of cooler locks, as well as offer some suggestions on whether or not they’re a suitable fit for you. But first, take a look at the table below for a high-level overview of the best cooler locks we’ve tested.
In any case, while some people believe that a handful of simple long-shank padlocks would suffice, you’re better off investing in some ice chest-specific locks and additional locking devices to get the most out of your cooler’s inbuilt locking capabilities.
We scoured the internet for the top products available, based on a combination of ratings, user comments, and customer reviews, for this review. We’ll cover both lid locks (to keep that valuable beer inside safe) and cooler cable locks (to keep your ice chest safe and secure from would-be thieves).
Is a Locks For Coolers Really Necessary?
One of the most common questions we get from readers and cooler proponents is whether or not they truly need a cooler lock. Obviously, this varies from person to person, but we recommend a cooler lock for anyone planning to:
- To keep their cooler out in the open.
- To place their cooler in a high-traffic area with a large number of people.
- To keep their cooler in public places unattended for long periods of time.
- To keep valuables in their refrigerator
- To keep goods that might be considered harmful.
- To reduce the number of times someone can open the cooler lid
- To put their cooler through rigorous testing in situations where the usual cooler closing mechanism (generally latches) would fail.
- To put their cooler on a moving vehicle, such as a truck, boat, or ATV.
If you tick even one of the boxes above, we recommend that you look into purchasing a cooler lock. You may also meet the conditions in more than one of these scenarios. In those instances, you might be a good candidate for both sorts of locks: one to secure your cooler and another to secure the contents within.
Locks For Coolers: Pros and Cons
There are advantages and disadvantages to everything in life. That isn’t any different when it comes to cooler locks. The most obvious advantage of a cooler lock is the increased security it offers. If you meet one of the conditions listed in the preceding section, a cooler lock can assist secure your investment while also giving you peace of mind.
And this protection can help you keep your cooler secure while driving your truck or riding your boat/motorcycle, as well as against those attempting to steal your cooler/items.
Another advantage of a cooler lock is that it can help your cooler stand out from the crowd and be easily identified.
The most significant disadvantage (apart from the expense) is the additional restrictions that must be met in order to access and/or move the cooler. If you’re in a rush or have a lot on your plate, this could be a very inconvenient step.
It’s also possible that you’ll misplace the key to the cooler or forget the combination. This may be a major headache because you’d have to use a more forceful method to break the lock, such as a vice or a saw.
Best Locks For Coolers
We’ll include some of our top picks for the best cooler locks on the market right now now that we’ve gone over the different types of Locks For Coolers when a cooler lock could be appropriate for you, and the benefits and drawbacks of cooler locks.
1. YETI Locks For Coolers
Even if you have an IGBC-certified bear-resistant cooler, it isn’t ‘officially bear proof’ until it’s locked up.
You can be officially official with this LEFTnotruc (long-shank Master Lock 500) lock set.
This lock is the recommended and most-popular lock for any hard-sided YETI rotomolded cooler (Tundra, Roadie). Furthermore, because the locks are stainless steel, you can rest assured that they will not rust or corrode with time, especially in tough, salty environments.
2. YETI Bracket Locks For Coolers
The YETI locking bracket fits into the anchor point tie-down slot on a YETI Tundra or Roadie, allowing you to fasten it to your truck bed, boat, or any other secure point using a chain or cable.
When you pair it with the Bear-Proof Padlocks, you’ll have a completely safe and secure rig that you won’t have to worry about leaving unattended.
The locking bracket is a YETI brand, and it’s constructed of corrosion-resistant high-strength carbon steel that threads easily through the anchor points on your cooler (there’s one on each side – you can purchase one, but most people get two).
The brackets should also fit other coolers, such as the RTIC rotomold ice chests, which are nearly comparable to the YETI Tundra series.
3. Master Lock Python Locks For Coolers
The Master Lock Python Locking Cable is the most popular cable to use with the YETI locking bracket, and it is by far the most popular choice (over 2,000 Amazon reviews) for turning your ice chest into a fully lockable cooler.
The cable is 6′ long, so it should easily fit into a safe spot in your truck bed or around a tree or picnic table at your campsite.
Also, despite its simplicity, the pin tumbler locking mechanism remains one of the most effective and difficult-to-break mechanisms available. Many lower-quality padlocks can be smashed with a sledgehammer, but this baby’s ABS lock body/cover bumper is nearly bulletproof. The cable is also entirely vinyl coated, making it impervious to traditional cable locks.
The Python lock is available in two thicknesses: 5/16″ and 3/16″, both in standard 6′ lengths.
4. Lumintrail Combination Padlock Locks For Coolers
The Lumintrail Combination Padlock is your best bet if you’re searching for a low-cost, one-lock-does-it-all combination to secure any brand of cooler you have (it doesn’t have to be a YETI).
These are quite popular for use with almost any universal ice chest and have lately become available at a reasonable price on Amazon.
A regular 4-digit lock (with a 1″ shackle) and a 4′ fully-braided steel security cable are included in the combination pack. And the cherry on top? It’s available as a single lock/cable kit or a two-pack.
Another amazing feature of the Lumintrail locks is that they come in a variety of colors. If you’re one of those persons who likes to color-match all of their varied toys (cooler with boat color, boat color with vehicle color, etc. ), you might as well color-match your lockable cooler with the lock itself.
And, as previously said, these locks/cables are quite general in terms of which coolers/ice chests they’ll suit – and you don’t even need the locking bracket to use them with a YETI Roadie or Tundra.
5. DENY Security Locks For Coolers
The Deny Security Cooler Lock may be useful for individuals who want a tried and true technique to lock their Yeti Cooler (and some other cooler brands with some modification). It currently supports 35, 45, and 65-quart capacities.
With the lid closed, this lock is made of heavy-duty stainless steel and is designed to wrap around the base of the cooler. This ensures verified security without compromising ice retention or storage capacity. You’ll also be able to reach the cooler’s contents without having to unlock the latching system. When you need to move the cooler, the provided keys can be used to engage and unlock the key slot.
If you want to put your cooler in the back of your truck, ATV, UTV, boat, or other vehicles, this is a wonderful option.
6. Disecu 4 Digit Combination Locks For Coolers
If you’re more concerned with keeping inquisitive eyes from stealing the contents of your cooler, a combination lock that fits between the lid and the body might be the way to go. The Disecu Combination lock is a tried and true device. This lock features a small (but robust) locking arm that easily slides into the drill hold found between the lid and the body of most ice chests.
You also don’t have to worry about losing track of small keys to open the lock because it’s a combination lock. Make sure to write down the combination code, though!
It has a strong construction, with a cast metal body that is rust-proof, waterproof, and cut-resistant due to the hardened zinc alloy/steel combination.
7. DENY Cooler Security Lid Locks For Coolers
Deny also makes the Security Lid Lock, which is an excellent device. This lock is for securing your cooler’s contents rather than the cooler itself.
This lock can also be slid through your cooler’s drill hole. This makes it simple to secure and remove, and it can be used on a variety of coolers.
While these locks were developed specifically for Yeti coolers, we’ve discovered that they also work on other models. Depending on the brand cooler you have, you’ll only have to double-check the spacing.
Thanks to the 304 stainless steel bolt, which is also exceptionally resistant to wear and strain, you won’t have to worry about it being easily cut through.
8. Schmidt-Riffer Metalcrafts Locks For Coolers
The Schmidt-Riffer Metalworks Universal Cooler Lock Bracket is a nice alternative for someone who is more of a handyman and seeking a low-cost option that allows versatility (provided you have the other essential parts).
These brackets loop under the lip of your favorite cooler and serve as an engagement point for attaching it to any device. The important thing to remember is that you must give the methods of security. This could be a chain, a cable, a metal rod, or something else.
This cooler lock is clearly intended to prevent someone from removing your cooler. It’s also a great technique to keep your cooler from sliding around in the rear of your vehicle. If you additionally want to prevent individuals from opening the lid to reach your chilled food, you’ll need to use it in conjunction with a lid lock.
Locks For Coolers Conclusion
There are a lot of cooler locks out there, as you can see. There are numerous various brands of cooler locks, as well as different types of cooler locks that serve different functions. The first step is to determine your individual requirements. Then you may narrow down your options to discover the best cooler lock for your needs.
A cooler can be a long-term investment for many of us. A high-quality cooler might also come with a hefty asking price. As a result, it’s critical that we safeguard our assets, and a cooler lock is an excellent way to do it.